crewID/libnfc
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add R-Pi 3 conf sample.

Browse source 
There have been changes to the Raspberry Pi 3's usage of serial ports with the addition of a Bluetooth LE module.
This configuration uses the mini UART without disabling any devices except for the linux serial console.
This commit is contained in:
Jim Anastassiou 2016-08-19 19:22:06 -04:00 committed by GitHub
parent 27ed3acc1a
commit 0d3d5c13ff
1 changed files with 19 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
contrib/libnfc/pn532_uart_on_rpi_3.conf.sample
View file

@ -1,6 +1,22 @@
## Typical configuration file for PN532 device on R-Pi connected using UART
## Note: to use UART port on R-Pi, you have to disable linux serial console:
## http://learn.adafruit.com/adafruit-nfc-rfid-on-raspberry-pi/freeing-uart-on-the-pi
## Typical configuration file for PN532 device on R-Pi 3 connected using miniUART
## Note: Changes have been made to R-Pi 3 with the addition of Bluetooth LE
## The UART is now being used by the BLE module. Instead of disabling it, you can
## use the PN532 device with the "mini UART", which is still hijacked by the linux kernel
## as a serial console
##
## Tested recipe with PN532 breakout from Adafruit
##
## To enable uart on GPIO, add this line to bottom of /boot/config.txt
## enable_uart=1
##
## Stop and disable serial console:
## $ sudo systemctl stop serial-getty@ttyS0.service
## $ sudo systemctl disable serial-getty@ttyS0.service
##
## Remove console from /boot/cmdline.txt by removing:
## console=serial0,115200 Save and reboot for changes to take effect.
##
name = "PN532 board via UART"
connstring = pn532_uart:/dev/ttyS0
allow_intrusive_scan = true