Merge r470-477 from trunk.

This commit is contained in:
Romain Tartiere 2010-07-29 10:59:52 +00:00
commit 30e715cff0
3 changed files with 42 additions and 11 deletions

View file

@ -30,15 +30,24 @@
#include <stdlib.h>
#include <time.h>
#ifndef _WIN32
// Needed by sleep() under Unix
#include <unistd.h>
// FIXME What about sleep() in Windows ?
#define sleep sleep
#define SUSP_TIME 1 // secs.
#else
// Needed by Sleep() under Windows
#include <winbase.h>
#define sleep Sleep
#define SUSP_TIME 1000 // msecs.
#endif
#include <nfc/nfc.h>
#include <nfc/nfc-messages.h>
#include "nfc-utils.h"
#define MAX_FRAME_LEN 264
#define TIMEOUT 60 // secs.
#define NORMAL_MODE 1
#define VIRTUAL_CARD_MODE 2
@ -48,15 +57,30 @@
bool sam_connection(nfc_device_t* pnd, int mode)
{
byte_t pncmd_sam_config[] = { 0xD4,0x14,0x00,0x00 };
size_t szCmd = 0;
byte_t abtRx[MAX_FRAME_LEN];
size_t szRxLen;
// Only the VIRTUAL_CARD_MODE requires 4 bytes.
int size = sizeof(pncmd_sam_config)-((mode == VIRTUAL_CARD_MODE) ? 0 : 1);
pncmd_sam_config[2] = mode;
if (!pnd->pdc->transceive(pnd->nds,pncmd_sam_config,size,abtRx,&szRxLen)) {
switch (mode)
{
case VIRTUAL_CARD_MODE:
{
// Only the VIRTUAL_CARD_MODE requires 4 bytes.
szCmd = sizeof(pncmd_sam_config);
}
break;
default:
{
szCmd = sizeof(pncmd_sam_config)-1;
}
break;
}
if (!pnd->pdc->transceive(pnd->nds,pncmd_sam_config,szCmd,abtRx,&szRxLen)) {
ERR("%s %d", "Unable to execute SAMConfiguration command with mode byte:", mode);
return false;
}
@ -71,10 +95,10 @@ void wait_one_minute()
printf("|");
fflush(stdout);
while (secs < 60)
while (secs < TIMEOUT)
{
sleep(1);
secs += 1;
sleep(SUSP_TIME);
secs++;
printf(".");
fflush(stdout);
}

View file

@ -286,14 +286,21 @@ bool pn532_uart_transceive(const nfc_device_spec_t nds, const byte_t* pbtTx, con
void
pn532_uart_wakeup(const nfc_device_spec_t nds)
{
byte_t abtRx[BUFFER_LENGTH];
size_t szRxLen;
/** PN532C106 wakeup. */
/** High Speed Unit (HSU) wake up consist to send 0x55 and wait a "long" delay for PN532 being wakeup. */
const byte_t pncmd_pn532c106_wakeup_preamble[] = { 0x55,0x55,0x00,0x00,0x00 };
/** After the preamble we request the PN532C106 chip to switch to "normal" mode (SAM is not used) */
const byte_t pncmd_pn532c106_wakeup_preamble[] = { 0x55,0x55,0x00,0x00,0x00,0x00,0x00,0xff,0x03,0xfd,0xd4,0x14,0x01,0x17,0x00,0x00,0xff,0x03,0xfd,0xd4,0x14,0x01,0x17,0x00 };
#ifdef DEBUG
PRINT_HEX("TX", pncmd_pn532c106_wakeup_preamble,sizeof(pncmd_pn532c106_wakeup_preamble));
#endif
uart_send((serial_port)nds, pncmd_pn532c106_wakeup_preamble, sizeof(pncmd_pn532c106_wakeup_preamble));
if(uart_receive((serial_port)nds,abtRx,&szRxLen)) {
#ifdef DEBUG
PRINT_HEX("RX", abtRx,szRxLen);
#endif
}
}
bool

View file

@ -232,9 +232,9 @@ void pn53x_usb_disconnect(nfc_device_t* pnd)
if((ret = usb_release_interface(pus->pudh,0)) < 0)
DBG("usb_release failed %i",ret);
DBG("%s","resetting USB");
usb_reset(pus->pudh);
if((ret = usb_close(pus->pudh)) < 0)
DBG("usb_close failed %i",ret);
usb_reset(pus->pudh);
free(pnd->nds);
free(pnd);
DBG("%s","done!");