Update CMake files in order to be able to compile under Windows 64bits. (Thanks to Fkooman)

CMakeLists.txt

@@ -45,9 +45,9 @@ ADD_SUBDIRECTORY(src)
 IF(MSVC)
   SET(CPACK_GENERATOR "NSIS")
 ELSE(MSVC)
-  SET(CPACK_GENERATOR "TGZ")
+  SET(CPACK_GENERATOR "TBZ2")
 ENDIF(MSVC)
-SET(CPACK_PACKAGE_FILE_NAME "libnfc-${VERSION}-bin")
+SET(CPACK_PACKAGE_FILE_NAME "libnfc-${VERSION}-bin-${CMAKE_SYSTEM_PROCESSOR}")
 SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Near Field Communication (NFC) library")
 SET(CPACK_PACKAGE_VENDOR "Roel Verdult")
 SET(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/README")

README-Windows.txt

@@ -1,41 +1,104 @@
-Requirements
+Requirements - Running
-============
+======================
-This project uses CMake [1] to create a Visual Studio project from the 
+In order to run the included tools, at least these dependencies should be 
-source files. 
+installed:
-
+
-It have been tested with:
+- LibUsb-Win32 0.1.12.2 [1]
-
+- Microsoft Visual C++ 2008 SP1 Redistributable Package [2]
-- Microsoft Visual C++ 2008 Express Edition, with SP1 [2]
+
-- LibUsb-Win32 0.1.12.2 [3]
+These C++ 2008 SP1 libraries are also part of "Microsoft .NET Framework 3.5 
-- NSIS 2.45 (to create Windows installer) [4]
+Service Pack 1 and .NET Framework 3.5 Family" which can be obtained through 
-
+Windows Update. 
-On Windows XP SP3.
+
-
+There are two versions of the redistributable package (one for x86 and one for 
-Compilation
+x64). Be sure which one is needed.
-===========
+
-
+Requirements - Development
-CMake can be used to create MSVC project files, then each MSVC can 
+==========================
-be used to compile the project, create an installer, etc.
+This project uses CMake for creating a Visual Studio project from the 
-
+source files. 
-MSVC project will create a shared library for Windows (nfc.dll), and
+
-a library file (nfc.lib) to link your applications against. It will compile
+The following software was used to create the libnfc distribution:
-examples against this shared library. Installer will install the DLL file 
+
-in the same directory as the examples if your goal was to be able to 
+- CMake 2.6.4 [3]
-run and install libnfc as a standard user. In a system wide installation
+- Microsoft Windows SDK for Windows 7 (7.0) [4]
-the DLL should be placed in "windows\system32" or any other directory in 
+- Microsoft .NET framework 3.5 SP1 (Windows Update)
-Windows PATH.
+- LibUsb-Win32 0.1.12.2 [1]
-
+- NSIS 2.45 (to create the installer) [5]
-If you want your own tools to use libnfc you have to link them with "nfc.lib"
+- 7-Zip 4.65 (for generating source archive) [6]
-which can be found in "lib" subdirectory under the installation root. Headers 
+
-can be found in "include" subdirectory.
+This was tested on Windows XP SP3, but should work on Windows Vista and 
-
+Windows 7 as well. Even on 64 bit systems.
-In a "normal" Windows install this would be:
+
-- "C:\Program Files\libnfc-x.x.x\lib"
+Building
-- "C:\Program Files\libnfc-x.x.x\include"
+========
-
+To build the distribution the NMake Makefiles generator of CMake was used. Here 
-
+is an example of how to generate a distribution with the above mentioned 
-
+requirements fulfilled (it is assumed the CMake binaries are in the system 
-[1] http://www.cmake.org
+path, this is optional during installation of CMake):
-[2] http://www.microsoft.com/express/vc/
+
-[3] http://libusb-win32.sourceforge.net/
+- Start -> Programs -> Microsoft Windows SDK v7.0 -> CMD shell
-[4] http://nsis.sourceforge.net/Main_Page
+- Now it is possible to run CMake and NMake:
+  
+  C:\Program Files\Microsoft SDKs\Windows\v7.0> cd c:\dev\libnfc-read-only
+  C:\dev\libnfc-read-only> mkdir bin
+  C:\dev\libnfc-read-only> cd bin
+  C:\dev\libnfc-read-only\bin> cmake-gui ..
+  
+Now you can configure the build. Press "Configure", specify "NMake Makefiles" 
+and then you have the opportunity to set some configuration variables. If you
+don't want a Debug build change the variable CMAKE_BUILD_TYPE to "Release".
+
+Now run NMake:
+
+  C:\dev\libnfc-read-only\bin> nmake package
+  
+To create the binary package, or:
+  
+  C:\dev\libnfc-read-only\bin> nmake package_source
+
+To create the source archive.  
+  
+NMake will create a shared library for Windows (nfc.dll), and
+a library file (nfc.lib) to link your applications against. It will compile
+the tools against this shared library. The installer will install the 
+DLL file in the same directory as the tools as our goal was to be able to 
+run and install libnfc as a standard user. In a system wide installation
+the DLL should be placed in "windows\system32" or any other directory in 
+the (system) path.
+
+If you want your own tools to use libnfc you have to link them with "nfc.lib"
+which can be found in the "lib" directory under the installation root. The
+header files can be found under "include" in the installation root.
+
+In a "normal" Windows install this would be:
+- "C:\Program Files\libnfc-x.x.x\lib"
+- "C:\Program Files\libnfc-x.x.x\include"
+
+You also need to copy the "nfc.dll" file to the same directory as your 
+application, or install it somewhere in the system path (see above).
+
+CMake can also be used to create the MSVC [7] project files instead of NMake 
+Makefiles, after which MSVC can be used to compile the project, create an 
+installer, etc.
+
+Building 64 Bit
+===============
+Building on native 64 bit should work "out of the box".
+
+It is also possible to "cross compile" for 64 bit systems on a 32 bit system.
+This can be accomplished by using the "setenv" command from the shell opened
+in the previous section. Try "setenv /?" to see what is available. When cross 
+compiling the name of the binary installer package generated is not correct, 
+because CMake does not notice it is cross compiling. It should work fine 
+however.
+
+References
+==========
+[1] http://libusb-win32.sourceforge.net/
+[2] http://www.microsoft.com/downloads/details.aspx?familyid=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2
+[3] http://www.cmake.org
+[4] http://msdn.microsoft.com/en-us/windows/bb980924.aspx
+[5] http://nsis.sourceforge.net/Main_Page
+[6] http://http://www.7-zip.org/
+[7] http://www.microsoft.com/express/vc/

cmake_modules/FindLIBUSB.cmake

@@ -0,0 +1,47 @@
+# This CMake script wants to use libusb functionality, therefore it looks 
+# for libusb include files and libraries. 
+#
+# Operating Systems Supported:
+# - Unix (requires pkg-config)
+#   Tested with Ubuntu 9.04 and Fedora 11
+# - Windows (requires MSVC)
+#   Tested with Windows XP
+#
+# This should work for both 32 bit and 64 bit systems.
+#
+# Author: F. Kooman <fkooman@tuxed.net>
+#
+
+IF(MSVC)
+  # Windows with Microsoft Visual C++
+  FIND_PATH(LIBUSB_INCLUDE_DIRS usb.h "$ENV{ProgramFiles}/LibUSB-Win32/include")
+  IF(${CMAKE_SYSTEM_PROCESSOR} STREQUAL "x64")
+    # on x64 (win64)
+    FIND_LIBRARY(LIBUSB_LIBRARIES NAMES libusb PATHS "$ENV{ProgramFiles}/LibUSB-Win32/lib/msvc_x64")
+  ELSE(${CMAKE_SYSTEM_PROCESSOR} STREQUAL "x64")
+    # on x86 (win32)
+    FIND_LIBRARY(LIBUSB_LIBRARIES NAMES libusb PATHS "$ENV{ProgramFiles}/LibUSB-Win32/lib/msvc")
+  ENDIF(${CMAKE_SYSTEM_PROCESSOR} STREQUAL "x64")
+ELSE(MSVC)
+  # If not MS Visual Studio we use PkgConfig
+  FIND_PACKAGE (PkgConfig)
+  IF(PKG_CONFIG_FOUND)
+    PKG_CHECK_MODULES(LIBUSB REQUIRED libusb)
+  ELSE(PKG_CONFIG_FOUND)
+    MESSAGE(FATAL_ERROR "Could not find PkgConfig")
+  ENDIF(PKG_CONFIG_FOUND)
+ENDIF(MSVC)
+
+IF(LIBUSB_INCLUDE_DIRS AND LIBUSB_LIBRARIES)
+   SET(LIBUSB_FOUND TRUE)
+ENDIF(LIBUSB_INCLUDE_DIRS AND LIBUSB_LIBRARIES)
+
+IF(LIBUSB_FOUND)
+  IF(NOT LIBUSB_FIND_QUIETLY)
+    MESSAGE(STATUS "Found LIBUSB: ${LIBUSB_LIBRARIES}")
+  ENDIF (NOT LIBUSB_FIND_QUIETLY)
+ELSE(LIBUSB_FOUND)
+  IF(LIBUSB_FIND_REQUIRED)
+    MESSAGE(FATAL_ERROR "Could not find LIBUSB")
+  ENDIF(LIBUSB_FIND_REQUIRED)
+ENDIF(LIBUSB_FOUND)

cmake_modules/FindPCSC.cmake

@@ -0,0 +1,41 @@
+# This CMake script wants to use PC/SC functionality, therefore it looks 
+# for PC/SC include files and libraries. 
+#
+# Operating Systems Supported:
+# - Unix (requires pkg-config)
+#   Tested with Ubuntu 9.04 and Fedora 11
+# - Windows (requires MSVC)
+#   Tested with Windows XP
+#
+# This should work for both 32 bit and 64 bit systems.
+#
+# Author: F. Kooman <fkooman@tuxed.net>
+#
+
+IF(MSVC)
+  # Windows with Microsoft Visual C++
+  FIND_PATH(PCSC_INCLUDE_DIRS WinSCard.h "$ENV{INCLUDE}")
+  FIND_LIBRARY(PCSC_LIBRARIES NAMES WinSCard PATHS "$ENV{LIB}")
+ELSE(MSVC)
+  # If not MS Visual Studio we use PkgConfig
+  FIND_PACKAGE (PkgConfig)
+  IF(PKG_CONFIG_FOUND)
+    PKG_CHECK_MODULES(PCSC REQUIRED libpcsclite)
+  ELSE(PKG_CONFIG_FOUND)
+    MESSAGE(FATAL_ERROR "Could not find PkgConfig")
+  ENDIF(PKG_CONFIG_FOUND)
+ENDIF(MSVC)
+
+IF(PCSC_INCLUDE_DIRS AND PCSC_LIBRARIES)
+   SET(PCSC_FOUND TRUE)
+ENDIF(PCSC_INCLUDE_DIRS AND PCSC_LIBRARIES)
+
+IF(PCSC_FOUND)
+  IF(NOT PCSC_FIND_QUIETLY)
+    MESSAGE(STATUS "Found PCSC: ${PCSC_LIBRARIES}")
+  ENDIF(NOT PCSC_FIND_QUIETLY)
+ELSE(PCSC_FOUND)
+  IF(PCSC_FIND_REQUIRED)
+    MESSAGE(FATAL_ERROR "Could not find PCSC")
+  ENDIF(PCSC_FIND_REQUIRED)
+ENDIF(PCSC_FOUND)

src/CMakeLists.txt

@@ -24,8 +24,8 @@ IF(LIBNFC_LANG_C99 AND NOT MSVC)
 ENDIF(LIBNFC_LANG_C99 AND NOT MSVC)
 
 IF(MSVC)
-  # Hide some warnings, this should be fixed in the code instead!
+  # We should fix the code, not hide warning!
-  ADD_DEFINITIONS("-D_CRT_SECURE_NO_WARNINGS")
+  #ADD_DEFINITIONS("-D_CRT_SECURE_NO_WARNINGS")
   # Include the stdint headers, because MSVC does not have them
   INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/../win32/stdint)
 ENDIF(MSVC)