diff --git a/contrib/libnfc/pn532_spi_on_rpi.conf.sample b/contrib/libnfc/pn532_spi_on_rpi.conf.sample
new file mode 100644
index 0000000..f3065d2
--- /dev/null
+++ b/contrib/libnfc/pn532_spi_on_rpi.conf.sample
@@ -0,0 +1,5 @@
+## Typical configuration file for PN532 device on R-Pi connected using SPI
+## Note: to use SPI port on R-Pi, you have to load kernel module spi-bcm2708:
+## Edit /etc/modprobe.d/raspi-blacklist.conf and comment: #blacklist spi-bcm2708
+name = "PN532 board via SPI"
+connstring = pn532_spi:/dev/spidev0.0:500000
diff --git a/contrib/libnfc/pn532_uart_on_rpi.conf.sample b/contrib/libnfc/pn532_uart_on_rpi.conf.sample
index 9773590..afd591e 100644
--- a/contrib/libnfc/pn532_uart_on_rpi.conf.sample
+++ b/contrib/libnfc/pn532_uart_on_rpi.conf.sample
@@ -1,5 +1,5 @@
 ## Typical configuration file for PN532 device on R-Pi connected using UART
 ## Note: to use UART port on R-Pi, you have to disable linux serial console:
 ##   http://learn.adafruit.com/adafruit-nfc-rfid-on-raspberry-pi/freeing-uart-on-the-pi
-name = "PN532 board"
+name = "PN532 board via UART"
 connstring = pn532_uart:/dev/ttyAMA0
diff --git a/contrib/libnfc/pn532_via_uart2usb.conf.sample b/contrib/libnfc/pn532_via_uart2usb.conf.sample
index 50f5e3a..3bdfa96 100644
--- a/contrib/libnfc/pn532_via_uart2usb.conf.sample
+++ b/contrib/libnfc/pn532_via_uart2usb.conf.sample
@@ -1,3 +1,3 @@
 ## Typical configuration file for PN532 board (ie. microbuilder.eu / Adafruit) device
-name = "Adafruit PN532 board"
+name = "Adafruit PN532 board via UART"
 connstring = pn532_uart:/dev/ttyUSB0