.TH NFC-MFTOOL 1 "June 26, 2009"
.SH NAME
nfc-mftool \- Mifare Classic command line tool based on libnfc
.SH SYNOPSIS
.B nfc-mftool
.RI \fR\fBr\fR|\fBw\fR
.RI \fR\fBa\fR|\fBb\fR
.IR KEYS
.IR DUMP

.SH DESCRIPTION
.B nfc-mftool
is an Mifare Classic tool that allow to read or write
.IR DUMP
file using Mifare keys provide in 
.IR KEYS
file.

The Mifare Classic tag is one of the most widely used RFID tags.
The firmware in the NFC controller supports authenticating, reading and writing to/from Mifare Classic tags.
This tool demonstrate the speed of this library and its easy-of-use.
It possible to read and write the complete content of a Mifare Classic 4KB tag within 1 second.
It uses a binary Mifare Dump File to store the keys and date for all sectors.

.SH OPTIONS
.BR r " | " w
Perform read from (
.B r
) or write to (
.B w
)card.
.TP
.BR a " | " b
Use A or B Mifare keys.
.TP
.IR KEYS
Mifare dump that contain Mifare keys.
.TP
.IR DUMP
Used to write card to file ( r ) or file to card ( w )


.SH BUGS
Please report any bugs on the
.B libnfc
forum at
.BR http://www.libnfc.org/community/ "."
.SH LICENCE
.B libnfc
and
.B nfc-tools
are covered by the GNU Lesser General Public License (LGPL), version 3.
.SH AUTHORS
Roel Verdult <roel@libnfc.org>
.PP
This manual page was written by Romuald Conty <romuald.conty@free.fr>.
It is licensed under the terms of the GNU GPL (version 2 or later).