61 lines
1.8 KiB
C
61 lines
1.8 KiB
C
#ifdef HAVE_CONFIG_H
|
|
# include "config.h"
|
|
#endif // HAVE_CONFIG_H
|
|
|
|
#include <stdlib.h>
|
|
#include <nfc/nfc.h>
|
|
#include <nfc/nfc-messages.h>
|
|
|
|
int
|
|
main (int argc, const char *argv[])
|
|
{
|
|
nfc_device_t *pnd;
|
|
nfc_target_info_t nti;
|
|
|
|
// Display libnfc version
|
|
const char *acLibnfcVersion = nfc_version ();
|
|
printf ("%s use libnfc %s\n", argv[0], acLibnfcVersion);
|
|
|
|
// Connect using the first available NFC device
|
|
pnd = nfc_connect (NULL);
|
|
|
|
if (pnd == NULL) {
|
|
ERR ("%s", "Unable to connect to NFC device.");
|
|
return EXIT_FAILURE;
|
|
}
|
|
// Set connected NFC device to initiator mode
|
|
nfc_initiator_init (pnd);
|
|
|
|
// Drop the field for a while
|
|
nfc_configure (pnd, NDO_ACTIVATE_FIELD, false);
|
|
|
|
// Let the reader only try once to find a tag
|
|
nfc_configure (pnd, NDO_INFINITE_SELECT, false);
|
|
|
|
// Configure the CRC and Parity settings
|
|
nfc_configure (pnd, NDO_HANDLE_CRC, true);
|
|
nfc_configure (pnd, NDO_HANDLE_PARITY, true);
|
|
|
|
// Enable field so more power consuming cards can power themselves up
|
|
nfc_configure (pnd, NDO_ACTIVATE_FIELD, true);
|
|
|
|
printf ("Connected to NFC reader: %s\n", pnd->acName);
|
|
|
|
// Poll for a ISO14443A (MIFARE) tag
|
|
if (nfc_initiator_select_passive_target (pnd, NM_ISO14443A_106, NULL, 0, &nti)) {
|
|
printf ("The following (NFC) ISO14443A tag was found:\n");
|
|
printf (" ATQA (SENS_RES): ");
|
|
print_hex (nti.nai.abtAtqa, 2);
|
|
printf (" UID (NFCID%c): ", (nti.nai.abtUid[0] == 0x08 ? '3' : '1'));
|
|
print_hex (nti.nai.abtUid, nti.nai.szUidLen);
|
|
printf (" SAK (SEL_RES): ");
|
|
print_hex (&nti.nai.btSak, 1);
|
|
if (nti.nai.szAtsLen) {
|
|
printf (" ATS (ATR): ");
|
|
print_hex (nti.nai.abtAts, nti.nai.szAtsLen);
|
|
}
|
|
}
|
|
// Disconnect from NFC device
|
|
nfc_disconnect (pnd);
|
|
return EXIT_SUCCESS;
|
|
}
|